Nano coatings applied on glass and ceramic surfaces reduce damage
resulting from pollution, icing, and provides acid rain repellent features.
Nasiol products under this category can be applied on a variety of surfaces such as building glass facades, vehicle windows, bath sink, tiles, shower cabins, hotel rooms, green houses, and all others.
Our products do not contain PFOS/PFOA. They are eco-friendly, non-toxic, safe and REACH compliant products.
Applicable Sectors
Building materials manufacturers, glass/ceramic manufacturers, restoration companies, furniture manufacturers, cleaning/maintenance companies, solar panel manufacturers, shower cabin manufacturers, air/sea/land vehicle manufacturers etc.
Nasiol C series nano coated surfaces make it difficult for the lime to adhere to the glass surfaces where it is applied. Stains formed over time can be easily cleaned with less detergents and less water.
Nasiol C is a hydrophobic and oleophobic transparent coating that is specially developed for glass and ceramic surfaces. It also provides, easy-to-clean and stain-free effects to the applied surfaces listed below:
Glass & Ceramics
| Packaging* | 1-5-30 L |
| Appearance | Colorless Liquid |
| Chemical Resistance | 13>pH>1 |
| Salt Water Resistance | |
| Moisture Resistance | |
| Dry Film Thickness | 75-100 nm |
| Consumption per Unit Area | 5 mL/m2 |
| Density @23°C | 0.81 g/cm3 |
| pH Value | 2 |
| Transparency | 99% |
| Light Refractive Index | 1.625 (Glass) |
| Application Temperature | 5°C/30°C (≤50% RH) |
| Temperature Durability | 275°C |
| Water Contact Angle | 106° @10 µL |
| Water Contact Angle After “3000” Wet Scrub (ISO-11998:2006) | 100° @10 µL |
| Water Sliding Angle | 15° @20 µL |
| Oil Contact Angle | 84° @10 µL |
Nasiol C1 is an economic formula of hydrophobic and oleophobic transparent coating that is specially developed for glass and ceramic surfaces. It also provides, easy-to-clean and stain-free effects to the applied surfaces listed below:
Glass & Ceramics
| Packaging | 1-5-30 L |
| Appearance | Colorless Liquid |
| Chemical Resistance | 12>pH>1 |
| Salt Water Resistance | |
| Moisture Resistance | |
| Dry Film Thickness | 75-100 nm |
| Consumption per Unit Area | 5 mL/m2 |
| Density @23°C | 0.80 g/cm3 |
| pH Value | 2 |
| Transparency | 99% |
| Light Refractive Index | 1.625 (Glass) |
| Application Temperature | 5°C/30°C (≤50% RH) |
| Temperature Durability | 275°C |
| Water Contact Angle | 102° @10 µL |
| Water Contact Angle After “2000” Wet Scrub (ISO-11998:2006) | 96° @10 µL |
| Water Sliding Angle | 28° @20 µL |
| Oil Contact Angle | 72° @10 µL |
